Titanium Mesh Sheet

 

When a project demands materials that hold up in harsh chemical environments, survive extreme temperatures, and stay lightweight enough to matter - most metals fall short. Titanium doesn't. Our Titanium Mesh Sheet is manufactured from commercially pure titanium (ASTM B265), processed through precision stamping and expanding techniques to deliver a flat, uniform open-structure sheet with consistent hole geometry and dimensional accuracy.

What sets this product apart is the combination of a high strength-to-weight ratio and exceptional corrosion resistance - two properties that titanium brings together better than almost any other engineering metal. The passive oxide film that forms on titanium's surface acts as a natural barrier against oxidizing and reducing media, acids, chlorine environments, and seawater, making this mesh genuinely reliable rather than just rated for it.

Our mesh sheets are produced in a modern manufacturing facility that operates under full-process quality control - from raw material incoming inspection to final dimensional checks before shipment. Each sheet is verified using spectrometer material analysis and physical property testing equipment, so what you receive matches what is specified. ISO 9001, ISO 14001, and ISO 45001 certifications back our quality and compliance commitments.

This product is well-suited for industrial buyers who need a dependable, precision-cut mesh material that integrates directly into production systems, filtration assemblies, or structural applications without additional processing.

 

 

Parameter	Value
Material Grade	Grade 1 (GR1), Grade 2 (GR2) - Commercially Pure Titanium
Standard	ASTM B265
Mesh Type	Expanded mesh; Stamped / perforated mesh
Hole Shape	Diamond (standard); Square and rectangle available on request
Sheet Thickness	0.1 mm – 3.0 mm (custom range available)
Surface Finish	Mill finish; Anodized; Polished (on request)
Quality Certifications	ISO 9001, ISO 14001, ISO 45001
Compliance	EU CE Certification, EU RoHS
Customization	Opening size, sheet dimensions, hole pattern, edge treatment
Packaging	Wooden box; labeled and protected for transit

 

 

Corrosion Resistance That Holds Up in Real Conditions

One of the most common failure points for metal mesh in industrial use is premature corrosion - especially in environments with chloride exposure, dilute acids, or chemical oxidizers. Titanium's natural oxide layer provides protection in those exact conditions, resisting pitting, crevice corrosion, and stress corrosion cracking at a level that stainless steel cannot match. For buyers in chemical processing, desalination, or marine applications, this translates directly into longer service life and a lower replacement frequency over the equipment's lifetime.

Strength Without the Weight Penalty

At roughly 4.5 g/cm³, titanium is approximately 40% lighter than steel while maintaining comparable - and in many cases superior - mechanical strength. For applications where load-bearing capacity matters alongside weight constraints, such as aerospace structural components or portable industrial filtration systems, this mesh delivers where heavier alternatives create design limitations.

Backed by Traceable, Equipment-Verified Quality Control

Our production facility runs spectrometer material analyzers, universal testing machines, and metallographic analysis systems as part of standard process control. Every batch goes through documented incoming material inspection and final product verification. The same rigorous quality framework that supports our established high-performance metal product lines is applied here - meaning consistent batch-to-batch reliability, not just passing marks on a single sample.

Flexible Hole Geometry and Sheet Dimensions

Standard diamond-pattern openings are available across a wide thickness and mesh-size range, but square and rectangular openings are also produced to order. Sheet dimensions, thickness, and edge treatment can all be customized to match your specific installation requirements. Whether you need a small qualification batch or a consistent bulk supply, our production process supports both without compromising dimensional tolerances.

 

 

The mesh is available in Grade 1 and Grade 2 commercially pure titanium. Custom configurations - including specific opening sizes, sheet dimensions, thickness, hole patterns, and edge treatments - can be arranged based on your application requirements. When submitting an inquiry, include your required mesh dimensions, opening geometry, thickness, and any relevant industry standard or end-use specifications.

For first-time orders, sample sheets are available for testing and qualification before committing to a larger production run. All shipments include material test certificates, and third-party testing can be supported upon request. Lead times vary by specification and order volume; standard-dimension configurations ship faster than fully custom orders.

 

 

• Chlor-alkali and electrochemical systems - anode substrates and filter elements in chlorine production and electrolysis
• Industrial filtration - chemical-resistant filter media in petroleum, pharmaceutical, and fluid processing lines
• Seawater desalination - mesh components in heat exchangers and water treatment modules exposed to chloride-rich media
• Aerospace and defense - structural components where low weight and high strength are both design requirements
• Medical devices - biocompatible mesh for orthopedic reconstruction and implant support (medical-grade processing available on request)
• Battery and energy systems - current collector mesh in lithium-ion cells and fuel cell assemblies
• Electromagnetic shielding - lightweight EMI shielding panels for sensitive electronic enclosures

 

 

Hot Tags: titanium mesh sheet, China titanium mesh sheet manufacturers, suppliers, factory, Cnc Titanium Parts, Titanium Alloy Sheet, Titanium Mesh Sheet, titanium products, titanium sheet and plate, Titanium Tubing for Exhaust