High Strength-to-Weight Ratio:
Delivers structural integrity comparable to alloy steels at nearly 45% lower weight.
Corrosion Resistance:
Forms a stable, self-healing passive titanium oxide (TiO2) surface film, providing exceptional resistance to marine atmospheres, oxidizing acids, and chloride solutions.
Thermal Stability:
Retains mechanical strength and creep resistance at operating temperatures up to 300°C to 500°C depending on the alloy grade.
Tight Metallurgical Control:
Controlled interstitial element limits (iron, oxygen, carbon, nitrogen) ensure predictable machinability and weldability.
|
Grade |
UNS Designation |
Type |
Fe (max) |
O (max) |
C (max) |
N (max) |
H (max) |
Ti |
|
Grade 1 |
R50250 |
CP Titanium |
0.20 |
0.18 |
0.08 |
0.03 |
0.015 |
Balance |
|
Grade 2 |
R50400 |
CP Titanium |
0.30 |
0.25 |
0.08 |
0.03 |
0.015 |
Balance |
|
Grade 5 |
R56400 |
Ti-6Al-4V |
0.40 |
0.20 |
0.08 |
0.05 |
0.0125 |
Balance |
|
Grade 7 |
R52400 |
CP + Pd (0.12-0.25) |
0.30 |
0.25 |
0.08 |
0.03 |
0.015 |
Balance |
|
Grade 12 |
R53400 |
Ti-0.3Mo-0.8Ni |
0.30 |
0.25 |
0.08 |
0.03 |
0.015 |
Balance |
|
Grade |
Tensile Strength (Min) |
Yield Strength (Min) |
Elongation in 2 in. (Min) |
|
Grade 1 |
240 MPa (35 ksi) |
170 MPa (25 ksi) |
24% |
|
Grade 2 |
345 MPa (50 ksi) |
275 MPa (40 ksi) |
20% |
|
Grade 5 |
895 MPa (130 ksi) |
828 MPa (120 ksi) |
10% |
|
Grade 7 |
345 MPa (50 ksi) |
275 MPa (40 ksi) |
20% |
|
Grade 12 |
483 MPa (70 ksi) |
345 MPa (50 ksi) |
16% |
|
Product Form |
Specifications |
|
Sheet & Plate |
Thickness 0.5 mm to 100 mm; Width up to 2000 mm; Length up to 6000 mm. |
|
Bar & Rod |
Diameter 3 mm to 350 mm; Rolled, forged, or centerless ground finish. |
|
Tube & Pipe |
Outer Diameter (OD) 6 mm to 219 mm; Wall Thickness 0.5 mm to 15 mm (Seamless & Welded). |
|
Wire |
Diameter 0.1 mm to 6.0 mm (Spooled or straightened cut lengths). |
Chemical Processing:
Pressure vessels, chlorine cell components, heat exchanger tubing, piping systems, and valve bodies handling aggressive acids and brine solutions.
Aerospace & Defense:
Airframe structural fasteners, exhaust ducting shields, hydraulic tubing lines, and turbine engine components.


Marine & Offshore:
Subsea valve actuators, seawater desalination plant piping, propeller shafts, and hull penetration fittings.
Medical Technology:
Orthopedic trauma plates, surgical bone screws, dental fixtures, and MRI-compatible surgical instrument housings.
Custom CNC Machining:
Multi-axis milling and turning centers capable of holding tolerances down to ±0.01 mm for complex geometries.
01
Waterjet & Laser Cutting:
Near-net-shape profiling from titanium plate stock to minimize material waste and machining lead times.
02
Surface Finishing:
Standard mill finish, acid pickling, grit blasting, passivation, and custom mechanical polishing.
03
Heat Treatment:
Vacuum annealing and stress-relieving cycles performed in inert gas atmospheres to prevent oxidation and hydrogen embrittlement.
04
Quality Systems:
Fully compliant with ISO 9001:2015 and AS9100D standards for aerospace and industrial manufacturing.
Chemical Verification:
Direct-reading optical emission spectrometry (OES) and inert gas fusion analyzers for precise interstitial gas tracking (O, N, H).
Mechanical Testing:
Room-temperature tensile testing, yield strength verification, and hardness testing (Rockwell/Brinell) performed per ASTM E8/E8M.
Non-Destructive Testing (NDT):
Ultrasonic testing (UT) conducted per AMS 2631 / ASTM B381 to inspect raw bar and plate stock for internal voids, inclusions, or laminations.
Dimensional Inspection:
CMM (Coordinate Measuring Machine) verification and laser scanning for machined components.
Traceability:
Permanent electro-chemical dot etching or laser marking of heat numbers on all delivered stock linked directly to the EN 10204 3.1 MTC.
Protection Standards:
Sheets and plates interleaved with protective plastic film or paper to prevent surface scratching; edges protected with high-density polyethylene edge guards.
01
Box Packaging:
Precision-machined parts individually wrapped in anti-corrosion VCI (Vapor Corrosion Inhibitor) bags and secured in heavy-duty export-grade plywood crates with internal bracing.
02
Customs & Compliance:
All wooden packaging complies with IPPC ISPM 15 standards and includes heat-treatment stamps to ensure smooth international customs clearance.
03
Documentation:
Waterproof pouches containing commercial invoice, packing list, Certificate of Origin, and EN 10204 3.1 Mill Test Certificates attached securely to the exterior of the crate.
04
Logistics & Terms:
Flexible shipping options including FOB, CIF, and DDP terms via airfreight or ocean container with full tracking and insurance coverage.
05

To obtain an accurate quotation for your titanium material or custom machining requirements, please provide the following details to our engineering sales team:
Material Grade: (e.g., ASTM B265 Gr 2, ASTM B348 Gr 5)
Product Form & Dimensions: (Thickness x Width x Length for plates; Diameter x Length for bars; OD x Wall x Length for tubes)
Quantity: (Total weight in kilograms/pounds or total piece count)
Processing Requirements: (Mill finish, cut-to-size, or 2D/3D drawing for CNC machining)
Quality & Certification Requirements: (Standard EN 10204 3.1 MTC, ISO 9001/AS9100 compliance, or specific third-party inspection like SGS)
Commercial Terms & Destination: (Requested Incoterms like FOB or DDP, and destination port or zip code)
As one of the most professional titanium products manufacturers and suppliers in China, we warmly welcome you to buy OEM titanium products from our factory. All custom made products are with high quality and competitive price. Contact us for quotation.