High Strength-to-Weight Ratio:
Maintains mechanical load-bearing capacity up to 300°C with a density (4.51 g/cm³) approximately 45% lower than austenitic stainless steels.
Passivation and Corrosion Behavior:
Spontaneous formation of a continuous, adherent titanium dioxide (TiO₂) surface film provides exceptional resistance to wet chlorine, oxidizing mineral acids, and marine salt solutions.
Controlled Microstructure:
Vacuum annealing processes ensure a uniform equiaxed alpha/beta grain structure, eliminating internal residual stresses prior to CNC machining or stamping.
Full Heat Traceability:
Individual plates and sheets carry permanent low-stress stencil markings linking physical stock directly to the master heat melt number on the Mill Test Certificate.
|
Grade |
Titanium (Ti) |
Nitrogen (N) |
Carbon (C) |
Hydrogen (H) |
Iron (Fe) |
Oxygen (O) |
Aluminum (Al) |
Vanadium (V) |
|
Grade 1 |
Balance |
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
— |
— |
|
Grade 2 |
Balance |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
— |
— |
|
Grade 5 |
Balance |
0.05 |
0.08 |
0.015 |
0.40 |
0.20 |
5.5–6.75 |
3.5–4.5 |
|
Grade |
Tensile Strength (MPa min) |
Yield Strength (0.2% Offset, MPa min) |
Elongation (%, min in 2 in.) |
|
Grade 1 |
240 |
170 |
24 |
|
Grade 2 |
345 |
275 |
20 |
|
Grade 5 (Ti-6Al-4V) |
895 |
828 |
10 |
|
Product Type |
Manufacturing Specifications |
|
Sheet Products (Cold Rolled) |
Thickness 0.5 mm to 4.75 mm; Width up to 1500 mm |
|
Plate Products (Hot Rolled) |
Thickness 4.75 mm to 100 mm; Width up to 3000 mm |
|
Standard Lengths |
2000 mm, 3000 mm, 6000 mm. Custom sizing available |
Aerospace Structures:
Aircraft skin panels, engine nacelle components, and structural frames utilizing Grade 5 (Ti-6Al-4V) plates.
Chemical Process Equipment:
Chlor-alkali diaphragms, pressure vessel walls, and shell-and-tube heat exchanger tube sheets.
Marine & Offshore:
Hull water-line structural plates, multi-stage flash desalination chamber linings, and subsea valve manifolds.
Industrial Manufacturing:
Jigs, fixtures, and pickling baskets exposed to aggressive acid solutions.
01
Thermal & Mechanical Cutting:
High-definition CNC waterjet cutting and abrasive band sawing executed to net or near-net CAD profiles, preventing edge heat-affected zones (HAZ).
02
Surface Condition Modification:
Chemical pickling (acid descaling to eliminate oxide layers), mechanical sandblasting, or single-side polishing.
03
Thermal Conditioning:
Mill annealed or stress-relieved deliveries in compliance with specific AMS thermal processing revisions.

Chemical Verification:
Optical Emission Spectrometry (OES) analysis performed on head, middle, and tail sections of every rolled lot.
Mechanical Validation:
Tensile testing executed via electro-mechanical load frames per ASTM E8.
Ultrasonic Examination:
Internal non-destructive testing (NDT) conducted per ASME SA-578 / AMS 2631 to inspect plates over 6 mm for internal discontinuities or inclusions.
Traceability & Certification:
EN 10204 3.1 Mill Test Certificates supplied standard. Third-party inspection (SGS, TÜV, Bureau Veritas) supported prior to dispatch.

Please submit the following parameters to our technical sales engineering team to receive a formal commercial proposal within 24 hours:
Specification & Grade: (e.g., ASTM B265 Grade 2 or Grade 5)
Form: Sheet or Plate
Exact Dimensions: Thickness × Width × Length (mm or inches)
Quantity: Total tonnage, piece count, or square meters
Processing Requirements: Standard mill plate or custom waterjet cut-to-drawing
Compliance / Inspection: EN 10204 3.1 MTC requirement or nominated third-party agency (SGS/TUV)
As one of the most professional titanium sheet and plate manufacturers and suppliers in China, we warmly welcome you to buy OEM titanium sheet and plate from our factory. All custom made products are with high quality and competitive price. Contact us for quotation.
Gold Titanium Sheet, Thin Titanium Sheet, Titanium Metal Sheet