Titanium Alloy Equipment Parts
The titanium alloy equipment accessories launched by China Super Tech Co., Ltd. are formed by three rounds of vacuum self-dissolution melting using aerospace-grade titanium ingots. Their overall density is only 60% of that of steel. They can be used continuously in strong acid and alkali environments for five years without significant rusting. They are high-reliability accessories specially developed for industrial high-load scenarios. The entire processing is completed in our own workshop, and the quality can be traced throughout the process.
- Product Introduction
Product features
1. Corrosion resistance far exceeds that of ordinary stainless steel
During the melting process, we added 0.3% palladium element to form a unique passivation protective film. After being immersed in a 10% sulfuric acid environment for 30 days, the corrosion rate was only 0.002mm per year, which was much lower than the corrosion standards of conventional accessories in the industry.
2. Does not deform during long-term use
The internal stress was eliminated through a 620℃ vacuum annealing process. It was continuously operated at 300℃ for 1000 hours, with the deformation not exceeding 0.02mm, avoiding the problem of stuck or shifted of ordinary accessories under high temperatures.
3. No magnetism and no signal interference
The overall material's magnetic permeability is lower than 1.00002, and it will not cause signal interference to the surrounding precision detection instruments. This is a characteristic that ordinary steel-made accessories are difficult to achieve.
Product Application
1. Swimming pool water treatment equipment
Located inside the ozone disinfection additive in the swimming pool, it will not rust even after long-term contact with chlorine-containing disinfectant water. There is no need to disassemble and replace corroded parts every year, reducing the downtime for swimming pool operation.
2. Seafood breeding circulation system
Placed on the impeller and connecting frame of the seawater circulation pump, it will not form scale or rust through even after long-term contact with high salinity seawater. There is no need to disassemble and clean the rusted impurities every six months, avoiding affecting the cleanliness of the breeding water body.
3. Urban building water supply equipment
Used on the high-pressure pump connection components of the secondary water supply in high-rise buildings, it will not react with the residual chlorine in the water to release heavy metals. It fully complies with the hygiene standards for domestic drinking water and ensures the safety of water supply.
Customized service
1. 1-on-1 Adaptation Optimization
Our engineers with 12 years of experience in titanium alloy processing can complete the force and working condition verification within 24 hours after receiving your drawings. We will free of charge optimize the unreasonable structural design for you to avoid the problem of installation mismatch after processing according to the original drawings.
2. Full Process Material Traceability
Each customized accessory comes with an exclusive material inspection report. The entire process record from raw material smelting to finished product processing can be checked, fully meeting the compliance acceptance requirements of domestic industrial projects.
Specification
|
Parameter |
Specification |
|
Product Name |
Titanium Alloy Equipment Parts |
|
Material Grades |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12, Gr23 (Custom Available) |
|
Manufacturing Process |
CNC Machining, Forging, Turning, Milling, Drilling, Welding |
|
Dimensions |
Customized According to Drawings or Samples |
|
Size Range |
Ø1 mm – Ø500 mm (Custom Sizes Available) |
|
Length Range |
1 mm – 3000 mm (Custom Available) |
|
Dimensional Tolerance |
±0.01 mm to ±0.05 mm (Depending on Design Requirements) |
|
Surface Finish |
Polished, Sandblasted, Pickled, Anodized, Passivated, Machined Finish |
|
Surface Roughness |
Ra 0.2–3.2 μm (Customizable) |
|
Density |
4.51 g/cm³ (Ti-6Al-4V) |
|
Tensile Strength |
345–950 MPa (Depending on Material Grade) |
|
Operating Temperature |
Up to 400°C (Depending on Alloy Grade) |
|
Corrosion Resistance |
Excellent Resistance to Acids, Alkalis, Seawater, and Chloride Environments |
|
Standard |
ASTM B348, ASTM B381, ASTM F136, ASTM B265, AMS 4928 (As Required) |
FAQ
What titanium alloy grades are available for equipment parts?
+
-
We offer a wide range of titanium grades, including Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and Grade 12, which can be selected according to different strength, corrosion resistance, and application requirements.
Are titanium alloy equipment parts corrosion-resistant?
+
-
Yes. Titanium alloy equipment parts provide excellent corrosion resistance and are widely used in chemical processing, marine engineering, oil & gas, and other demanding industrial environments.
Can you manufacture customized titanium alloy equipment parts?
+
-
Our titanium alloy equipment parts can achieve high precision machining with tolerances up to ±0.01 mm, depending on the product design and specifications.
What machining accuracy can you provide?
+
-
304 stainless steel meets the international requirements of food grade,316 stainless steel is not only food grade or medical grade. However,the use of this medical grade as a production cup will not bring additional benefits to everyone. Why is it called 304 or 316? This is mainly defined according to the material composition. 316 stainless steel is not similar to mineral materials,after use can release some substances to promote human absorption.
What quality inspections are available before shipment?
+
-
All titanium alloy parts undergo strict quality inspections before delivery. Material certificates, dimensional inspection reports, and third-party testing services are available upon request.
Hot Tags: titanium alloy equipment parts, China titanium alloy equipment parts manufacturers, suppliers, factory, Alloy Of Tungsten and Titanium, Beryllium Titanium Alloy, Ti Nb Alloy, titanium alloy, titanium alloy custom machined parts, titanium alloy housing components











